Dell PowerEdge 1855 Посібник з використання - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з використання для Сервер Dell PowerEdge 1855. Dell PowerEdge 1855 44 сторінки. Using dell blade servers in a dell poweredge high availability cluster
Також для Dell PowerEdge 1855: Інформаційне оновлення (2 сторінок), Посібник із швидкого старту (12 сторінок), Посібник користувача (33 сторінок)

server module

power switch and KVM ports

control panel

DRAC/MC module

KVM module

fan module

power supply module

The power supply modules, fan modules, Dell Remote Access

Controller/Modular Chassis (DRAC/MC), and I/O modules are shared

resources of the server modules in the chassis. The system may ship with an

optional external Universal Serial Bus (USB) diskette drive and an optional

external USB CD drive, which you can use to set up and configure the server

modules.

For information on supported cluster configurations, see "Cabling Your Blade

Cluster Hardware" on page 25. For a list of supported hardware and software

components, see the Platform Guide for your PowerEdge cluster solution

located on the Dell Support website at support.dell.com.

NOTE:

To ensure proper operation and cooling, all bays must be populated with

either a server module or a blank prior to turning on the system.

The PowerEdge server enclosure include the following hardware components

for a cluster configuration:

•

Server modules

•

Gigabit Ethernet switch modules or Gigabit Ethernet pass-through

modules (based on your configuration)

•

Fibre Channel switch modules or Fibre Channel pass-through modules

(based on your configuration)

Introduction

I/O bay A2

I/O bay B2

10 I/O bay C2

11 I/O bay C1

12 I/O bay B1

13 I/O bay A1