Dell PowerEdge 1855 Посібник з використання - Сторінка 21

Переглянути онлайн або завантажити pdf Посібник з використання для Сервер Dell PowerEdge 1855. Dell PowerEdge 1855 44 сторінки. Using dell blade servers in a dell poweredge high availability cluster
Також для Dell PowerEdge 1855: Інформаційне оновлення (2 сторінок), Посібник із швидкого старту (12 сторінок), Посібник користувача (33 сторінок)

Cluster Storage

Table 1-5 lists supported storage systems and the configuration requirements

for the cluster nodes and stand-alone systems connected to the storage

systems.

Table 1-5. Cluster Storage Requirements

Storage

Configuration

Supported storage

Cluster shared

storage

Multiple clusters

and stand-alone

systems

Requirement

See the Platform Guide for your PowerEdge cluster solution on

the Dell Support website at support.dell.com.

If you are using either switch modules or pass-through

modules to connect to network storage devices that are

attached to external switches in a SAN or an IP SAN, see the

Platform Guide for your PowerEdge cluster solution located on

the Dell Support website at support.dell.com to determine the

maximum number of supported storage systems.

If you are using switch modules to connect to network storage

devices in an internal SAN or IP SAN without external

switches, you can use a maximum of two supported storage

systems.

If you are using pass-through modules to connect to storage

devices in a direct-attached configuration, you can use a single

supported storage system.

Network storage systems that provide LUN masking or

assignment functionality may be shared between multiple

clusters or between clustered and stand-alone servers. To

determine whether the configuration is supported, see the

Platform Guide for your PowerEdge cluster solution located on

the Dell Support website at support.dell.com.

Introduction