Dell PowerEdge 2420 Посібник

Переглянути онлайн або завантажити pdf Посібник для Сервер Dell PowerEdge 2420. Dell PowerEdge 2420 20 сторінок. Rack enclosures
Також для Dell PowerEdge 2420: Посібник (20 сторінок), Посібник (17 сторінок), Посібник (12 сторінок), Посібник (10 сторінок), Посібник (10 сторінок), Посібник (9 сторінок), Посібник (9 сторінок), Посібник (10 сторінок), Посібник (12 сторінок), Посібник (11 сторінок), Посібник (8 сторінок), Технічний посібник (37 сторінок)

About Warnings

WARNING:

or death.

Installing the Rack Stabilizer Feet

WARNING:

installed could cause the rack to tip over, potentially resulting in bodily injury under

certain circumstances. Therefore, always install the stabilizer feet before installing

components in the rack.

WARNING:

the rack on its slide assemblies at one time. The weight of more than one extended

system could cause the rack to tip over and cause injury.

WARNING:

bottom 3-U spaces of the rack cabinet.

NOTE:

For complete rack installation instructions, see your rack installation guide.

The stabilizer feet help prevent the rack from tipping over when a system

or other component is pulled out of the rack with the slide assemblies fully

extended.

Install stabilizer feet on the rack as follows:

•

Install front and side stabilizer feet on a standalone rack.

•

Install front stabilizer feet on all racks in a suite, and install left or right

stabilizer feet on the racks at each end of a suite.

You may need the following tools and supplies to install the rack:

•

12-mm wrench

•

Keys to the rack doors and side panels

October 2008

A WARNING indicates a potential for property damage, personal injury,

Installing systems in a rack without the front and side stabilizer feet

After installing systems in a rack, never pull more than one system out of

For stability, you must ensure that a minimum of 50 lbs. is installed in the