Dell Brocade VDX 6940 Посібник з конфігурації - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з конфігурації для Перемикач Dell Brocade VDX 6940. Dell Brocade VDX 6940 12 сторінок. Ps series

2.7

Configure global LLDP settings to disable DCB

The following commands are issued to disable dcbx-tlv and iscsi-app tlv.

sw0(config)#protocol lldp

sw0(conf-lldp)#no advertise dcbx-iscsi-app-tlv

sw0(conf-lldp)#no advertise dcbx-tlv

sw0(conf-lldp)#exit

2.8

Note: The port number scheme changes because the edge ports are now converted to 4 x 10 mode. To

view the port number scheme, perform a "show interface status" or "do show interface status" command.

sw0(config)# interface TenGigabitEthernet 1/0/1:1-4

sw0(conf-if-te-1/0/1:1-4)# no fabric isl enable

sw0(conf-if-te-1/0/1:1-4)# no fabric trunk enable

Note: For the remainder of this document,any actions that are performed on interface "TenGigabitEthernet

1/0/1:1-4" must also be performed on the other "4 x 10" edge port interfaces:

1/0/2:1-4

1/0/3:1-4

1/0/4:1-4

1/0/5:1-4

2.9

sw0(conf-if-te-1/0/1:1-4)# mtu 9216

Reminder: Perform this step on the other 4 x 10 edge ports.

2.10

sw0(conf-if-te-1/0/1:1-4)# switchport

sw0(conf-if-te-1/0/1:1-4)# switchport mode access

Reminder: Perform these steps on the other 4 x 10 edge ports.

Brocade VDX 6940 Switch Configuration Guide for Dell PS Series SANs | SCG3306