Dell Brocade VDX 6940 Configuratiehandleiding - Pagina 8

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Dell Brocade VDX 6940. Dell Brocade VDX 6940 12 pagina's. Ps series

2.7

Configure global LLDP settings to disable DCB

The following commands are issued to disable dcbx-tlv and iscsi-app tlv.

sw0(config)#protocol lldp

sw0(conf-lldp)#no advertise dcbx-iscsi-app-tlv

sw0(conf-lldp)#no advertise dcbx-tlv

sw0(conf-lldp)#exit

2.8

Note: The port number scheme changes because the edge ports are now converted to 4 x 10 mode. To

view the port number scheme, perform a "show interface status" or "do show interface status" command.

sw0(config)# interface TenGigabitEthernet 1/0/1:1-4

sw0(conf-if-te-1/0/1:1-4)# no fabric isl enable

sw0(conf-if-te-1/0/1:1-4)# no fabric trunk enable

Note: For the remainder of this document,any actions that are performed on interface "TenGigabitEthernet

1/0/1:1-4" must also be performed on the other "4 x 10" edge port interfaces:

1/0/2:1-4

1/0/3:1-4

1/0/4:1-4

1/0/5:1-4

2.9

sw0(conf-if-te-1/0/1:1-4)# mtu 9216

Reminder: Perform this step on the other 4 x 10 edge ports.

2.10

sw0(conf-if-te-1/0/1:1-4)# switchport

sw0(conf-if-te-1/0/1:1-4)# switchport mode access

Reminder: Perform these steps on the other 4 x 10 edge ports.

Brocade VDX 6940 Switch Configuration Guide for Dell PS Series SANs | SCG3306