Dell Brocade VDX 6940 Configuratiehandleiding - Pagina 9

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Dell Brocade VDX 6940. Dell Brocade VDX 6940 12 pagina's. Ps series

2.11

Enable link level flow control (802.3x)

sw0(conf-if-te-1/0/1:1-4)# qos flowcontrol tx off rx on

sw0(conf-if-te-1/0/1:1-4)# exit

Reminder: Perform these steps on the other 4 x 10 edge ports.

2.12

sw0(config)#protocol spanning-tree rstp

sw0(config-rstp)#exit

sw0(config)# interface TenGigabitEthernet 1/0/1:1-4

sw0(conf-if-te-1/0/1:1-4)# spanning-tree edgeport

Reminder: Perform these steps on the other 4 x 10 edge ports.

2.13

sw0(conf-if-te-1/0/1:1-4)# no lldp disable

sw0(conf-if-te-1/0/1:1-4)# no cee

sw0(conf-if-te-1/0/1:1-4)# no lldp iscsi-priority

sw0(conf-if-te-1/0/1:1-4)# end

Reminder: Perform these steps on the other 4 x 10 edge ports.

2.14

Sw0# copy running-config startup-config

This operation will modify your startup configuration. Do you want to continue?

[y/n]:y

2.15

Repeat the commands from sections 2.1 through 2.14 to configure the second switch.

Brocade VDX 6940 Switch Configuration Guide for Dell PS Series SANs | SCG3306