Dell D18M Налаштування та технічні характеристики - Сторінка 22
Переглянути онлайн або завантажити pdf Налаштування та технічні характеристики для Перемикач Dell D18M. Dell D18M 39 сторінок. Remote power switch
Також для Dell D18M: Посібник користувача (45 сторінок), Посібник з налаштування та технічних характеристик (39 сторінок), Посібник з монтажу (11 сторінок)
Друкувати сторінку
Keys
Navigation
Spacebar
Expands or collapses a drop-down list, if applicable.
Tab
Moves to the next focus area.
Esc
Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a message
that prompts you to save any unsaved changes and restarts the system.
System setup options
NOTE:
Depending on the and its installed devices, the items listed in this section may or may not appear.
General options
Table 19. General
Option
System Information
Boot Sequence
Advanced Boot Options
UEFI Boot Path Security
Date/Time
.
22
System setup
Description
Displays the following information:
•
System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag,
Ownership Date, Manufacture Date, and the Express Service Code.
•
Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory
Channel Mode, Memory Technology, DIMM 1 Size, DIMM 2 Size.
•
PCI Information: Displays SLOT1, SLOT 2, SLOT1_M.2, SLOT2_M.2
•
Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock
Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3
Cache, HT Capable, and 64-Bit Technology.
•
Device Information: Displays SATA-0, SATA 4, M.2 PCIe SSD-0, LOM MAC Address, Video
Controller, Audio Controller, Wi-Fi Device, and Bluetooth Device.
Allows you to specify the order in which the computer attempts to find an operating system from the
devices specified in this list.
•
Windows Boot Manager
•
ONboard NIC (IPV4)
•
Onboard NIC (IPV6)
Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By default,
this option is selected.
•
Enable Legacy Option ROMs—Default
•
Enable Attempt Legacy Boot
This option controls whether or not the system will prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 Boot Menu.
•
Always, Except Internal HDD—Default
•
Always, Except Internal HDD and PXE
•
Always
•
Never
Allows you to set the date and time settings. Changes to the system date and time take effect
immediately.