Dell Force10 S4820T System Посібник для початківців - Сторінка 25

Переглянути онлайн або завантажити pdf Посібник для початківців для Перемикач Dell Force10 S4820T System. Dell Force10 S4820T System 39 сторінок.

Installing the Switch

You can mount the switch in the 1U front-rack or 1U two-post (flush and

center) configurations. The following is an example of a 1U front-rack

configuration. For the 1U two-post (flush and center) configurations, you can

slide the switch into the rails in the same manner as the four-post

configurations.

1U Front-rack Installation

You must configure the rails that are attached to the switch.

1 Attach the switch rails (inner chassis members) to the S4820T switch.

Figure 1-9, item 1 shows the detail for the front standoff with the locking

tab.

Figure 1-9. Attaching the Switch Rails

Installation