Dell Force10 S4820T System 시작하기 매뉴얼 - 페이지 25

{카테고리_이름} Dell Force10 S4820T System에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Force10 S4820T System 39 페이지.

Installing the Switch

You can mount the switch in the 1U front-rack or 1U two-post (flush and

center) configurations. The following is an example of a 1U front-rack

configuration. For the 1U two-post (flush and center) configurations, you can

slide the switch into the rails in the same manner as the four-post

configurations.

1U Front-rack Installation

You must configure the rails that are attached to the switch.

1 Attach the switch rails (inner chassis members) to the S4820T switch.

Figure 1-9, item 1 shows the detail for the front standoff with the locking

tab.

Figure 1-9. Attaching the Switch Rails

Installation