Christian Vogel BATWING Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Літаки Christian Vogel BATWING. Christian Vogel BATWING 19 сторінок.

Now the GFK midrib can finally be glued. Again, the components are to be roughened with sandpaper before

bonding with Epoxy 2 components. After applying the adhesive, thread the left component onto the GFK

bolts and press them together. Now also the GFK shear force bolts are inserted through the 3 GFK

components and averaged on both sides from the same supernatant. Press the components against a straight

surface with the help of screw clamps until final curing

Finally, the GFK parts for the battery holder and the receiver holder are glued.

3. Wings

3.1 Preparation

The structure of the wing is done using a template. Before the ribs can be inserted in the template, a

few preparatory work must be done.