Dell PowerEdge 350 Посібник з монтажу - Сторінка 29

Переглянути онлайн або завантажити pdf Посібник з монтажу для Перемикач Dell PowerEdge 350. Dell PowerEdge 350 32 сторінки. Wake-on-lan (wol) support on dell servers
Також для Dell PowerEdge 350: Оновлення інформації про діагностику системи (2 сторінок), Інформаційне оновлення (30 сторінок), Встановлення обладнання (22 сторінок), Посібник (15 сторінок)

support.dell.com

captive

fastener

Figure 1-20. Installing the Cable-Management Arm

Align the free end of the cable-management arm (the end with the pin and cap-

tive thumbscrew) to the back end of the right (or left) side inner rail (as viewed

from the back) of the system.

Secure the cable-management arm to the inner rail with the captive thumbscrew

(see Figure 1-20).

Attach the input/output (I/O) cables to their respective expansion cards on the

back of the system.

Connect the remaining cables to the system.

For details, see your system's Installation and Troubleshooting Guide and User's

Guide.

Secure the cables to the cable-management arm:

After connecting the cables to the system, unscrew the thumbscrews that

secure the front of the server to the front vertical rail.

Slide the system forward to the fully extended position.

Route the cables along the cable-management arm, allowing some additional

cable slack at the hinge positions, and secure the cables to the cable-

management arm with the Velcro straps attached to the cable-management

arm.

Rack Installation Guide

1-23