EarthWise TC70001 Посібник оператора - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник оператора для Румпель EarthWise TC70001. EarthWise TC70001 9 сторінок. Tiller/cultivator
Також для EarthWise TC70001: Посібник оператора (12 сторінок)

Друкувати сторінку

MAINTENANCE

Before carrying out maintenance operations, disconnect power supply.

Before each use check the extension cord for

Replace worn or damaged parts with original

signs of damage or ageing. Replace the cable if

replacement parts only. Parts from another tiller/

it is cracked, split or otherwise damaged. Check the

cultivator may not fit properly causing an unsafe

condition of the tines and ensure that all threaded

situation.

connections are securely tightened. If the tines

become dull or blunt, sharpen or replace them. Call

Make sure all protective devices are secure and in

our customer service help line at 1-800-313-5111

good condition. Repair or replace if necessary.

for assistance.

Lubrication (Fig. 7): The tines drive transmission

Once per season lubricate the tines and shaft. At

case has grease installed at the factory. It is not

the end of the season, check the tiller/cultivator for

required that the grease level be checked nor

damage prior to storing. Repair or replace damaged

recommended that grease be added during the

or broken parts.

first 2 years of use. After the second season of use,

follow the directions as described below:

CAUTION: Always clean the tiller/cultivator after

each use. Failure to carry out proper cleaning can

result in damage to the tiller/cultivator or result in

poor performance.

M10 X 6



Clean the underside of the motor support plate and

7.5 X

1.8

housing around the tines with a scrub brush, and a

soft cloth dampened with a mild soap and water

mixture. Never use a water hose to clean the till-

er! To remove soil and debris from the

trans-

mission and tines, use a stiff brush or a

damp-

ened cloth. Clean the vents on the motor housing

and remove any remaining grass or dirt. Once

cleaned, wipe the tines and shaft dry and apply a

light coat of oil to prevent rust.

Tines Removal and Installation (Fig. 6): Worn

tines invite poor performance and overload of the

motor. Check tines before each use. Sharpen or

replace the tine assemblies with new ones when

Drain screw plugs are located on the right side of

necessary. Call 1-800-313-5111 for assistance.

transmission housing. Lay the tiller/cultivator on

its left side and clean the transmission of dirt and

debris prior to removing the drain screw plugs. If

necessary, remove tine assemblies to have better

access to the drain screw plug. Use a 5mm hex

M8 X 40

key to unscrew the plugs.

Using a squeeze bottle or tube, add approximately

2.4 oz. (70ml) of auto gear lube. Do not overfill.

When completed, reinstall both drain screw plugs

into the transmission.

WARNING: Injury can occur while working on the

tines. Wear protective gloves.

To remove the complete tine assemblies from the

shaft, remove the M8 X 40 hex head bolt from the

shaft. Remove the tine assembly from the shaft.

Reverse above steps to install tines.

The Clean Alr Cholce

www.earthwisetools.com

WARRANTY

This product is manufactured for The Great States Corporation/American Lawn Mower Company. The

Great States Corporation/American Lawn Mower Company, Shelbyville, Indiana, has been making

lawn mowers for over 100 years and it warrants to the original owner that each new product and

service part is free from defects in material and workmanship and agrees to repair or replace under

this warranty any defective product or part from the original date of purchase for two (2) years except

for the conditions and circumstances listed below. Proof of purchase (original dated sales receipt)

must accompany all warranty claims.

THIS WARRANTY IS NOT TRANSFERABLE AND DOES NOT COVER:

Products sold damaged or incomplete, sold

Expendable items that become worn

"as is", sold reconditioned, or used as rental

during normal use.

equipment.

Cosmetic defects that do not interfere with

product functionality.

Delivery, installation, or normal adjustments

explained in the operator's manual.

Freight costs from customer to vendor.

Damage or liability caused by shipping,

Repair and transportation costs of products

improper handling, improper installation,

or parts determined not to be defective.

incorrect voltage or improper wiring,

ANY INCIDENTAL, INDIRECT, OR

improper maintenance, improper

modification, or the use of accessories and/

CONSEQUENTIAL LOSS, DAMAGE, OR

or attachments not specifically

EXPENSE THAT MAY RESULT FROM

recommended.

ANY DEFECT, FAILURE, OR

MALFUNCTION OF THE PRODUCT.

Some states do not allow the exclusion or

Repairs necessary because of operator

limitation on how long an implied warranty

abuse or negligence, or the failure to install,

operate, maintain, or store the product

lasts, so the above limitations may not

according to the instructions in the

apply to you.

operator's manual.

ANY NON-RESIDENTIAL USE OR

COMMERCIAL USE VOIDS ALL

Damage caused by cold, heat, rain,

WARRANTIES.

excessive humidity, corrosive environments

and materials, or other contaminants.

The Clean Alr Cholce

www.earthwisetools.com

07/15/16