Miele NOVOTRONIC W 1926 Інструкція з експлуатації Посібник з експлуатації - Сторінка 26
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Пральна машина Miele NOVOTRONIC W 1926. Miele NOVOTRONIC W 1926 48 сторінок. Miele washer user manual
Також для Miele NOVOTRONIC W 1926: Інструкція з експлуатації Посібник з експлуатації (48 сторінок)
Друкувати сторінку
Problem solving guide
What to do if, . . .
. . . the "Pre-wash",
"Main wash" or "Rinse
1-2" indicator lamp is
flashing?
. . . The "Rinse & hold"
indicator lamp is flash-
ing?
. . . The "Final spin" in-
dicator lamp is flash-
ing?
. . . The "ON" indicator
lamp is flashing?
. . . The wash is too wet
after the final spin?
. . . The machine
shakes during the spin
cycle?
26
Cause . . .
There is an internal prob-
lem.
The spin speed selector
has been set to "Without
final spin".
The final spin has not
taken place. The machine
detected an imbalance.
The child-safety feature is
activated, and the pro-
gram has been changed.
The spin speed selected
was too low.
The load was not evenly
distributed in the drum,
and the laundry was spun
at a reduced speed to
protect the machine.
The drain pump or lint
trap is clogged.
The four feet are not rest-
ing evenly on the floor.
The shipping struts have
not been removed.
Remedy . . .
Restart the program. If
the indicator lamp starts
flashing again, call the
Service Dept.
Select a spin speed set-
ting.
– Redistribute the laun-
dry load.
– Select a spin speed.
– Turn the program se-
lector to "Spin".
Go back to the program
originally selected.
Select a higher spin
speed next time.
Mix large and small items
in a load to avoid imbal-
ance.
Clean the drain pump or
lint trap.
Level the machine (see
Installation Section).
Remove the shipping
struts.