Allmand MAXI LITE II Посібник із швидкого старту - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Промислове обладнання Allmand MAXI LITE II. Allmand MAXI LITE II 17 сторінок.

SERIAL NUMBER 10-000001 & 11-000001

Testing Generator Output at Main Circuit Breaker

( c ontinued from the previous page ) .

WARNING: Dangerous voltage and/or current may be present when a

voltage test is being conducted. To reduce risk of serious injury or death from electrical

shock, if you are not trained to safely work with high voltage, do not attempt any of these

procedures. You must seek assistance from qualified personnel.

If the previous procedure indicates proper voltage at the top (Input) main breaker

terminals ( see figure M.1 and A.1 on the next page). The meter reading should indicate

120 volts +10%. If a reading of 120 volts +10% is not measured at each terminal, the

main breaker is faulty and must be replaced. See page 1 for a list of parts, visit our web

site at

w ww.allmand.com/support/productsmanualsliterature.aspx

breakdowns, or contact the Allmand parts and service team at 1- 800-562-1373 for

correct replacement circuit breakers.

Figure M.1

MAXI LITE II

for a full list of parts