Miele KF 882 iD-1 Посібник з експлуатації та встановлення - Сторінка 38
Переглянути онлайн або завантажити pdf Посібник з експлуатації та встановлення для Холодильник Miele KF 882 iD-1. Miele KF 882 iD-1 45 сторінок. With dynamic cooling
Друкувати сторінку^ Remove hinge pin d, tilt the lower
appliance door and take it off.
^ Use a screwdriver to remove plug j.
^ Replace the lower hinge pin i
together with its washer h on the
other side.
^ Take cover cap k off fixing bracket
l and unscrew it. It is used later on
the other side for securing the
appliance into the housing niche.
^ Unscrew hinge plate e, rotate it
180°, and fit it onto the opposite side:
Screw the outside screw f in only
half way on the opposite side. Then
put the hinge plate on it and push it
inwards. Then secure using the inner
screw.
^ Place the lower appliance door on
the bottom hinge pin i, and close
the appliance door.
^ Then place the top hinge pin d in
position.
38
^ Completely unscrew outer screw m
at the top, and half screw it in to the
opposite side.
^ Fit the upper appliance door onto
hinge pin a, then hang the hinge
plate on the previously fitted screw
b, push it inwards, and secure using
the second screw c.
^ Make sure that both appliance doors
are correctly aligned and adjust if
necessary. Then tighten all screws in
the hinge plates.
^ Fit all covers and plugs.