Miele KF 882 iD-1 Посібник з експлуатації та встановлення - Сторінка 40

Переглянути онлайн або завантажити pdf Посібник з експлуатації та встановлення для Холодильник Miele KF 882 iD-1. Miele KF 882 iD-1 45 сторінок. With dynamic cooling

Друкувати сторінку

^ Push the appliance into the niche.

Make sure that the mains cable does

not get trapped.

^ Screw fixing bracket a back on (if

this has not already been done).

^ Push the appliance up against the

housing on the door opening side

( ), so that the sealing strip is

pressed against it.

^ Then push the appliance into the

niche until the front edge of the hinge

plates are flush with the housing unit

floor ( ), and the front edge of the

opened fixing bracket a is flush with

the housing unit.

A gap of 43 mm must be maintained

between the appliance and the

housing unit on the hinge side.

(Marked X on the drawing)

^ Secure the appliance on the hinge

side to the housing unit at the top

and in the middle

by using the shorter 5 x 75 mm c

screws and the smaller spacer

sleeves d, and

by using the longer 5 x 80 mm c

screws and the longer spacer

sleeves d.