Miele KF 882 iD-1 Посібник з експлуатації та встановлення - Сторінка 41
Переглянути онлайн або завантажити pdf Посібник з експлуатації та встановлення для Холодильник Miele KF 882 iD-1. Miele KF 882 iD-1 45 сторінок. With dynamic cooling
Друкувати сторінку^ Secure the appliance in the housing
unit using the short 4 x 14 mm
screws b through the bottom hinge
plates and then tighten them up.
^ Screw fixing bracket e back on (if
this has not already been done).
^ Secure the appliance to the housing
unit wall on the door opening side
using two 4 x 14 mm screws through
the upper fixing bracket a and one
4 x 14 mm screw f through fixing
bracket e and then tighten them.
^ Close the fixing bracket a back up
again and fit cover g.
^ Align cover strip h by sliding it
parallel to the housing unit ceiling.
The cover strip must not protude.
^ Secure the appliance to the top of the
housing unit using the short 4 x
14 mm screws i through the cover
strip before tightening them.
^ Fit the door coupling parts a to the
appliance door at handle height
using the 3.9 x 9.5 mm b self
tapping screws (on a larger door an
extra door coupling should be fitted).
Use the pre-drilled holes.
^ Open the doors right out and push
the coupling guides c in to the door
coupling parts.
41