Miller 1025 Посібник оператора - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник оператора для Аксесуари для фотоапаратів Miller 1025. Miller 1025 13 сторінок. Fluid head

Друкувати сторінку

Introduction

Thank you for purchasing the Arrow 40/55 Fluid Head. The

Arrow 40 Fluid Head has been designed to suit payload

capacities from ENG to standard conﬁguration EFP cameras.

The Arrow 55 Fluid Head has been designed to suit EFP and

Studio cameras.

The robust design and construction of the Arrow 40/55 Fluid

Head offers maximum stability, accuracy and durability and

includes precision ball bearing mounted Fluid Drag Plate

system in the Pan and Tilt assembly to deliver true ﬂuid drag

performance over the entire temperature and payload range.

The Fluid Drag and the Counterbalance system were

designed to provide excellent control and repeatability and

offer progressive equal increments of drag and torque.

The Arrow 40/55 Fluid Head also offers Illuminated single

control location for operating Pan/Tilt, Counterbalance and

viewing Bubble level.

The Arrow 40/55 Fluid Head will give best performance when

used on a wide range of Miller tripods, including SOLO ENG

(#1505), Sprinter II (#1589, #1580, #1576) and HD (#931)

tripod. This will ensure maximum system stability to suit any

professional set-up. The Arrow 40/55 Fluid Head will suit

most industry standard 100 mm tripods as well, please refer

to manufactures' manual for mounting details.

Safety Instructions

Attaching/removing the camera

Please use this manual to familiarise yourself with the operation

of the Arrow 40/55 Fluid Head and observe these instructions

to prevent any damage to your equipment. Ensure that all

equipment is operating correctly and free from defects and

damage, also please ensure that the tripod is steady, secure

and that the bowl is approximately horizontal when attaching

the camera. The operator is responsible for the safe operation

of this piece of equipment.

Do not exceed the maximum payload capacity of the Fluid

◗

Head.

Do not leave the camera unattended on the Fluid Head.

◗

Do not release the SLIDING PLATFORM LOCK whilst the

◗

camera is at an angle.

Do not adjust the tripod whilst the camera is attached to

◗

the Fluid Head.

Ensure PAN HANDLE CLAMP and CLAMP NUT is securely

◗

tightened.

Apply TILT LOCK when adding/removing equipment from

◗

the camera or when attaching/removing the camera from

the Fluid Head.

Hold camera securely whilst changing Counterbalance,

◗

Pan Drag or Tilt Drag settings.

Hold the camera securely whilst releasing the QUICK

◗

RELEASE KNOB.

Hold camera securely whilst adjusting the CLAMP NUT to

◗

level the Fluid Head.