Panasonic AG-HMC40PJ Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Відеокамера. Panasonic AG-HMC40PJ. Panasonic AG-HMC40PJ 14 сторінок. Editing avchd with imovie 09
Також для Panasonic AG-HMC40PJ: Посібник користувача (7 сторінок), Посібник (19 сторінок), Посібник (18 сторінок), Посібник (13 сторінок)

Друкувати сторінку

eDiTing WiTh finAl CuT pro 7

sTeP #1 – oPen fInal CUT PRo 7

After Final Cut Pro opens, your first step should be to set your audio and video setting to the appropriate ProRes (LT)

setting for your project.

sTeP #2 -ClICk on fInal CUT PRo > aUDIo VIDeo seTTIngs.

sTeP #3 – seT YoUR seqUenCe, CaPTURe anD DeVICe ConTRol PReseTs

Since Final Cut Pro does not handle AVCHD natively, you must set your Sequence Presets as discussed earlier.

The table below shows which Preset should be assigned to each format.

format

1080/60i

1080/24p

1080/30p

720/24p

720/30p

720/60p

preset

Apple ProRes 422 (LT) 1920 x 1080 60i 48kHz

Apple ProRes 422 (LT) 1920 x 1080 24p 48kHz 1080/30p

Apple ProRes 422 (LT) 1920 x 1080 30p 48kHz

Apple ProRes 422 (LT) 1280 x 720 24p 48kHz

Apple ProRes 422 (LT) 1280 x 720 30p 48kHz

Apple ProRes 422 (LT) 1280 x 720 60p 48kHz

Sequence Preset is the emphasis here, capture is N/A, device control is

N/A.

Video and Audio Playback will depend on your system configuration.

Set Sequence Preset to the appropriate ProRes (LT) setting and then Click

OK.

note: if you forget this step, fCp 7 will automatically sense the format

of your first clip and ask if you would like to set the sequence to match

the clip.

For more information on the various codecs offered in FCP 7 and their

benefits, please visit