Diamondback 64683 Посібник користувача та інструкції з техніки безпеки - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача та інструкції з техніки безпеки для Пила. Diamondback 64683. Diamondback 64683 20 сторінок. 7" heavy-duty tile saw with sliding table
Друкувати сторінку
installing Extension tray
Standing at back of Saw, place the tabs on the
Extension Tray (149) into the corresponding
holes in the Water Tray and push the Extension
Tray down to a horizontal position.
Filling the Water tray
1. Place the Drain Plug into the hole on
the bottom of the Water Tray.
2. Fill the Water Tray with clean water up to
the Maximum Fill Line before every use.
nOticE: Water level must be kept above Minimum
Fill Line at all times during operation or damage
to the Pump and/or Saw Blade will occur.
Workpiece and Work area Set up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
Item 64683
For technical questions, please call 1-888-866-5797.
Water tray
Extension tray installation
Maximum
Minimum
Fill Line
Fill Line
Filling Water tray
3. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
4. Keep workpieces pressed firmly against
the Table and Fence while cutting.
5. Mark cut lines using waterproof marker or crayon.
note: This tool is intended for use on
man-made masonry and tile products only.
Extension
tray
Drain plug
Page 13