Panasonic SA-AK521 Інструкція з експлуатації Посібник з експлуатації - Сторінка 14
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стереосистема Panasonic SA-AK521. Panasonic SA-AK521 40 сторінок. Cd stereo system model no. sc-ak521
Друкувати сторінку
Cassettes
SUPER
SOUND EQ
SUBWOOFER
MIC VOL
PRESET EQ
Microphone
(not included)
MIC
c, DECK 1
[, REC
VOLUME
PLAY MODE
ALBUM (
or
)
SHIFT
S.WOOFER,
S.SOUND EQ
Playback
You can use either deck 1 or deck 2 for tape playback.
Use normal position tapes.
High position and metal position tapes can be played, but the unit will
not be able to do full justice to the characteristics of these tapes.
1
Press [;:, TAPE].
The unit comes on.
If a cassette was loaded, play starts automatically (One touch play).
2
Press [c, DECK 1] or [c, DECK 2] and insert the
cassette.
Insert with the side to be played
facing towards you and the
exposed tape facing down.
Close the holder by hand.
3
Press and hold [PLAY MODE] on the remote control to
select the reverse mode.
Every time you press and hold the button:
: One side is played.
: Both sides are played.
: Both sides are played repeatedly until [L, STOP] is
pressed.
To listen to 2 tapes consecutively
Load a tape into each deck and select "
played repeatedly until [L, STOP] is pressed.
4
Press [;:, TAPE] to start playback.
Every time you press the button: / R
F - : The forward side (front side) will play.
/ R : The reverse side will play.
To stop tape playback
Press [L, STOP].
To fast-forward or rewind
Press [g/REW/3] (rewind) or [f/FF/4] (fast-forward).
To select between loaded decks
14
Press [DECK 1/2] (remote control: [PLAY MODE]).
RQT7418
g
/REW/3,
f
/FF/4
-/J, CD
L, STOP
c, DECK 2
DECK 1/2
/-, TAPE
CLOCK
CLOCK
/
PL PL AY
/
AUTO OFF
O OFF
REC
REC
TIMER
TIMER
SLEEP
EEP
CD DISP
CD DISP
DIMMER
DIMMER
ABC
ABC
DEF
DEF
DISC
DISC
1
2
3
GHI
GHI
JKL
JKL
MNO
MNO
PROGRAM AM
PROG
4
5
6
PQRS
PQRS
TUV
TUV
WXYZ
WXY
PLAY MODE
AY MODE
7
8
9
SPACE
SPACE
REP
REPEAT AT
DEL
DEL
0
10
CD
CD
TUNER
TUNER
TAPE
TAPE
CLEAR
LEAR
BAND
ND
AUX
AUX
VOL
VOL
VOL
VOL
AL BUM
BUM
CURSOR
CURSOR
g
REW
FF
, REW/3,
f
, 4/FF
TITLE
TITLE
INTRO
INTRO
MARKER
MARKER
ENTER
ENTER
SEARCH
SEARCH
K A R AO K E
K A R AO K E
SHI
SHIFT
S. S.SO SOUND EQ
UND EQ PRE RESET EQ
T EQ
MUT UTING
ING
KARAOKE,
PRESET EQ
Front side
". Both tapes will be
F -
Note
•
Tape playback is momentarily interrupted if you open the other deck.
•
Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
•
Tape slack can get caught up in the mechanism and should be
taken up before the tape is played.
•
Endless tapes can get caught up in the deck's moving parts if used
incorrectly. Use tapes appropriate to this unit's auto-reverse
mechanism.
Recording
Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.
Preparation:
Wind up the leader tape so recording can begin immediately.
Press [;:, TAPE] then [L, STOP] to select tape as the source.
1
Press [c, DECK 2] and insert the cassette to be
recorded.
The tape direction is automatically set to "F :".
To record on the reverse side
Press [;:, TAPE] twice, then press [L, STOP]
2
Press and hold [PLAY MODE] on the remote control to
select the reverse mode.
Every time you press and hold the button:
: One side only records.
,
: Both sides record (forward
"
" automatically changes to "
3
Select the source to be recorded.
Radio recording:
Tune in the station. (A page 13)
CD recording:
1 Insert the CD(s) you want to record.
Press [:/J, CD] and then [L, STOP].
2 Prepare the desired CD recording mode.
Remote control only
•
To record programmed tracks (A do steps 1–3 on page 9
for CD-DA or steps 1–4 on page 10 for MP3).
•
To record specific CDs/tracks
1. For CD-DA, do steps 1 to 2 on page 8: "To listen to
specific CDs and tracks (CD Play Mode function)".
For MP3, do steps 1 to 2 on page 9: "CD Play Mode
function for MP3".
Ensure CD is stopped.
2. (MP3 only) For 1-ALBUM mode and 1-SONG mode:
Press [ALBUM (
3. For 1-SONG mode: Press [g, REW/3] or [f,
4/FF] to select the track.
Tape-to-tape recording:
1 Press [;:, TAPE] and then [L, STOP].
2 Press [c, DECK 1] and insert the cassette you want to record.
4
Press [a, REC] to start recording.
To stop recording
Press [L, STOP].
If the tape finishes before the CD
The CD continues playing. Press [L, STOP] to stop it.
Reducing noise when recording AM
Remote control only
Hold down [PLAY MODE] while recording.
Every time you hold down the button: BP1
Choose the setting with the least noise.
Note
•
Changes to volume and sound/field quality do not affect recording.
•
You cannot open deck 1 while recording.
•
You cannot fast-forward or rewind one deck while recording with
the other.
•
When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.
(Continued on next page)
reverse).
" when [a, REC] is pressed.
or
)] to select the album.
BP2