Olympus CX31 Інструкція з експлуатації - Сторінка 13

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Olympus CX31. Olympus CX31 24 сторінки. Biological microscope

4-3 Stage

Fig. 13

#Releasing the curved finger with great force or suddenly releasing

your grip on the curved finger knob @ while releasing the curved

finger will crack or damage the slide glass. Always place the

specimen with great care.

Observation with Specimen Holder for Single Specimen Slide

1. Turn the coarse adjustment knob ² counterclockwise (in the direction

of the arrow) to lower the stage.

2. Open the spring-loaded curved finger ³ on the specimen holder and

place the specimen slide into the specimen holder from the front.

3. After placing the slide as far as it will go, gently release the curved

finger ³.

Observation with Specimen Holder for Two Specimen Slides

1. Place the first specimen slide as described in steps 1 and 2 above,

then place the second specimen slide so that it contacts the first

specimen slide.

2. Gently release the curved finger ³.

Observation by Placing the Specimen Slide with One Hand

Place the specimen slide at the front of the stage, then slide the

specimen slide on the stage surface to slowly and gradually open the

curved finger in the direction of the arrow. Insert the specimen slide

into the specimen holder until it is fully and properly seated in the

specimen holder.

· Cover Glass

Use cover glasses of 0.17 mm thickness in order to allow the

objectives exhibit their full performances.

· Specimen Slide

Use specimen slides of 0.9 to 1.4 mm thickness. Using thicker

specimen slides may result in inaccurate imaging of the field iris

diaphragm image on the specimen.

CX31

(Fig. 13)