Alpha-InnoTec SWC - Series Посібник з експлуатації - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Тепловий насос Alpha-InnoTec SWC - Series. Alpha-InnoTec SWC - Series 20 сторінок. Brine/water heat pumps
Друкувати сторінку
6.5 Installing the control
NOTE
The control can be inserted in a recess in the
front panel of the unit or can be installed on
the wall.
Insert the control in the unit and connect
1.
slot. To do this, dismantle the front panel
(
"Dismantle housing panels for transport with
handcart or carrying the unit" on page 10),
press the lugs together and push out of the
openings.
2.
panel.
3.
Position the control in the recess in the front unit
panel.
4.
Cut the cable to length generously so that the
front panel can be removed and placed to the
side of the unit. Do not cut the cable ties for
strain relief of the LIN bus cable at the electric
control box.
–
the strain relief at the electrical control box
– All other cables approx. 1.2 m
18
Subject to change without notice | 83056700dUK – Translation into English of the original German operating manual | ait-deutschland GmbH
5.
Use cable ties (
20 cm in front of the connector (strain relief).
6.
Push the cable through the opening in the front
panel of the unit from below and into the control.
7.
Press the lugs of the control into the openings in
the front panel of the unit.
200 mm