Axminster MCB100A Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Пила. Axminster MCB100A. Axminster MCB100A 20 сторінок. 4" metal cutting bandsaw

VERTICAL CUTTING

1. Fasten the supporting bar (A) in Fig. 6

into the slot at the saw head.

2. Raise saw head to vertical position by

lifting up the knob (B) a little to release

the lock-pin and slide it into the slot which

is set for 90 degree.

3. Remove the small plate (C).

4. Before cutting a bigger work, take away

the carrying handle (E). After service,

replace the handle.

Caution:

Be sure that the machine is

disconnected from the power source

before attempting to service or take

any component away!

The band saw is equipped with TRIPUS

magnetic switch which is designed for

operating safety. After power failure, the

machine has to be restarted by opening the

cover and pushing the inner " ON " button.

There is a red button attached on the switch

cover, depress it to stop all machine functions

if emergency. This magnetic switch also

connects with the limit switch at the back of

bed, when the work piece is completely cut,

both switches will shut off automatically.

Fig. 6

MAGETIC SWITCH