Alphasmart 3000 Посібник із швидкого старту - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Клавіатура Alphasmart 3000. Alphasmart 3000 13 сторінок.
Також для Alphasmart 3000: Інструкція з монтажу (4 сторінок), Короткий посібник (3 сторінок)

Друкувати сторінку

Alphasmart 3000 Посібник із швидкого старту

Other Features

Here is a partial list of other features supported by your

AlphaSmart 3000. For Troubleshooting information refer to

the respective section at www.alphasmart.co.uk. Please see

the Keyboard Shortcuts section at the end of the manual for

further reference and summary:

To Password Protect all 8 Files

This function allows different passwords to be ascribed to

different files, effectively allowing you to have 8 different users

per AlphaSmart.

The AlphaSmart 3000 is shipped with this function disabled. To

enable it for the first time, you will need to contact our Technical

Support desk at 0870 120 0718 and ask for the master

password, please remember to have your registration details to

hand.

Then press ctrl-option-cmd-P, type the master password when

prompted to activate the password protection.

To enable individual passwords

Open the files you wish to individually password protect.

Press option-cmd-P.

You will then be asked to enter the "old" password before

entering a new one. The factory default password for this

is "write". Enter this and then enter your new password,

which can be 1-6 characters in length, backspace and Tab

are not accepted characters.

To reset passwords to factory default

AlphaWord file passwords can all be reset to the factory

default value using the keyboard command ctrl-shift-

option-cmd-P and entering the master password.

AlphaSmart 3000

To Enable or Disable Access to Calculator

When you are in AlphaWord, the keyboard command ctrl-cmd-

C displays a screen that prompts you for the master password

to disable or enable the Calculator, you will need to contact our

Technical Support desk at 0870 120 0718 and ask for the

master password, please remember to have your registration

details to hand. If you select Calculator from the SmartApplet

menu when the Calculator is disabled, the message "The

Calculator is turned off." will be displayed briefly before

returning to the SmartApplet menu.

User Defined Auto Power-off

The default auto power-off setting on your AlphaSmart is 4

minutes. To change this press cmd-option-T then set to your

preferred time by pressing the up or down arrow keys.

Auto Repeat/Key Repeat Control

As a default, when a key is pressed and held down the

AlphaSmart will continue to write that letter on the screen. If

Auto Repeat is disabled then only one character is produced

per key press, irrespective of how long it is held down for. To

do this press option-cmd-K and then press 1. Likewise to

disable.

Sticky Keys

With Sticky Keys enabled, you can type combination keystrokes

without actually pressing the keys simultaneously. This means

you can make capital letters by pressing shift first and then a

letter key, or operate function commands without pressing the

combinations of keys simultaneously. To enable Sticky Keys

press option-cmd-K and then press 2. Likewise to disable.

Show Marks

When Show Marks is enabled, it visually displays screen

functions like Tab or Return when they otherwise would not be.

To enable Show Marks press option-cmd-K and then press 3.

Likewise to disable.