ARCCAPTAIN CUT50 Посібник користувача - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник користувача для Зварювальна система ARCCAPTAIN CUT50. ARCCAPTAIN CUT50 20 сторінок. Plasma cutter 50a

Друкувати сторінку

5. MAINTENANCE

5.1 Daily maintenance

WARNING

The power of the switching box and the cutting machine should be shut down

before daily checking (except appearance checking without contacting the

conductive body) to avoid personal injury accidents such as electric shock and

burns.

Tips:

1) Daily checking is very important in keeping the high performance and safe operation

of this cutting machine.

2) Do daily checking according to the table below, and clean or replace components

when necessary.

3) In order to ensure the high performance of the machine, please choose components

provided or recommended by dealer when replacing components.

Items

Whether any of the components are damaged or loosely

connected;

Front panel

Whether the output quick sockets are tightened;

Whether the abnormity indicator illuminates.

Whether the input power cable and buckle are in good

Back panel

condition;

Whether the air intake is unobstructed.

Cover

Whether the bolts are loosely connected.

Side plates

Whether the side plate is loosely fixed.

Chassis

Whether the screws are loosely connected.

Whether the machine enclosure has color fading or

overheating problems;

Whether the fan sounds normal when the machine is

Routine

running;

Whether there is abnormal smell, abnormal vibration or

noise when the machine is running.

Digital Welder Expert, Know You More

Daily checking of the cutting machine

Checking requirements

Remarks

If unqualified,

check

the

interior of the

machine, and

tighten

replace

the

components.

If unqualified,

tighten

replace

the

components.

If abnormal,

check

the

interior of the

machine.

https://www.arccaptain.com