Epson 1160 CFS Інструкція з монтажу Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Принтер Epson 1160 CFS. Epson 1160 CFS 12 сторінок.

E) While holding the syringe vertical, pointed up, wrap some paper towel around the tip

of the Bottom Fill Adapter, and carefully push on the syringe to remove any air

trapped in the top of the syringe. If you push too hard, ink will shoot up to the

ceiling, be very gentle.

Now that the air is gone, adjust the volume of ink in the syringe so that you have the

amount shown in the above table. Hold the syringe tip over the open ink bottle and

push the syringe plunger until you have the bottom of the rubber plunger at the right

mark.

G) Hold the cartridge being filled at eye level, keeping the cartridge orientated in its

normal position. Insert the tip of the Bottom Fill Adapter into the exit port on the

bottom of the cartridge. Don't turn the cartridge upside down. Push the tip firmly

into the exit port and slowly inject the ink into the cartridge.

Keep the cartridge at a 45 degree angle, front down, for the first half of the ink

injection. Then, for the second half, keep the cartridge level. Never turn cartridge

upside down.

S a v e

M o n e y

MIS Associates Inc

http://www.inksupply.com

a n d

I m p r o v e

2901 Auburn Rd

Fax: 248-289-6013

Y o u r

Auburn Hills, MI 48326

P r i n t i n g

800-445-8296