Epson 1400 CFS Інструкція з монтажу Посібник з монтажу - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Принтер Epson 1400 CFS. Epson 1400 CFS 15 сторінок.

The tubes should make a nice smooth curve to the bottles. Don't let your tubes make any

vertical loops. The transition into the bottles should be smooth.

Step 10

Using you hand push the carriage all of the way to the right so that it resembles the

photo below.

Ensure that carriage is all of the way to the right

Next, plug the printer back into the wall outlet.

Plug printer into wall outlet

Finally, press and hold the power button to turn the printer on.

Turn on printer

At this point the printer will run through its initial diagnostics and should run a cleaning

cycle. If at any point the tubing becomes tangled or the printer gives a red flashing light,

unplug the printer from the wall and double check the tube positioning in the clips.

Tangling is usually the result of the tubes being too loose, while a red flashing light

indicates the tubing is too tight.

S a v e

M o n e y

a n d

I m p r o v e

Y o u r

P r i n t i n g

MIS Associates Inc

2901 Auburn Rd

Auburn Hills, MI 48326

800-445-8296

http://www.inksupply.com

Fax: 248-289-6013