Epson 570e - LQ B/W Dot-matrix Printer Інформаційний посібник про продукт - Сторінка 15
Переглянути онлайн або завантажити pdf Інформаційний посібник про продукт для Принтер Epson 570e - LQ B/W Dot-matrix Printer. Epson 570e - LQ B/W Dot-matrix Printer 18 сторінок. Warranty statement
Також для Epson 570e - LQ B/W Dot-matrix Printer: Короткий довідник (15 сторінок), Технічні характеристики (2 сторінок), Обмежена гарантія (1 сторінок)
Друкувати сторінку
6. Replace the paper guide, if necessary, and replace the printer
cover. Then close the paper guide cover.
7. Turn on the printer. Make sure the Paper Out and Pause
lights are off.
While you can often set the default settings through your
application software or printer driver, you may need to change a
default setting from the printer's control panel using the default
setting mode. The table below lists the default settings (in bold)
and options you can select in this mode.
0
Follow the steps below to enter the default setting mode and
change the printer's default settings.
1. Make sure paper is loaded and the printer is turned off.
2. While holding down the
The printer enters the default-setting mode and prints the
language selection instructions.
3. If you need to select a different language, press the
button until the Font lights indicate the language you want,
as described in the language selection instructions.
4. Press the
selection and print the current default settings.
5. If you do not need to change any settings, go to step 6.
If you want to change any of the default settings, press the
button to print the instructions (three pages)
in the language you selected.
Follow these instructions to change the default settings
using the buttons on the printer's control panel.
6. When you finish, turn off the printer and exit the default
setting mode. The current settings remain in effect until
you change them again.
If you notice that the vertical lines in your printout are not
properly aligned, you can use the printer's bidirectional
adjustment mode to correct this problem.
1. Make sure paper is loaded and the printer is turned off.
4/00
EPSON LQ-570e
button, turn on the printer.
button to confirm your language
EPSON LQ-570e
- 15