Digilin Colour Theme 1 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Освітлювальне обладнання Digilin Colour Theme 1. Digilin Colour Theme 1 8 сторінок. Single channel dmx dimmer
Друкувати сторінкуColour Theme 1 - Single Channel DMX Dimmer
User Manual
7.1 - 17 September 2020
Serial Commands
This mode provides a simple method to control the Colour Theme Controller via a PC (or any device in
which the serial data output can be formatted correctly, which includes a number of home
automation/lighting control systems.). If echo is enabled, characters sent will be echoed back, unless an
incorrect character is detected (i.e. not a number), in which case all characters will be ignored until the
carriage return character is detected.
The command to dim is the '-' character followed by a number in the range of 0 to 20 (in ASCII). Each value
represents a 5% step in the dim level, with 0 being off and 20 being 100%. A dim command can directly
follow a show command. Refer to Appendix B. Serial Command Examples for further explanation.
digilin.com.au
+617 3899 1267
Page 6 of 8