FIAMA VIR-SP Посібник

Переглянути онлайн або завантажити pdf Посібник для Монітор FIAMA VIR-SP. FIAMA VIR-SP 4 сторінки. Display for irrigator for coil calculation

DISPLAY FOR IRRIGATOR FOR COIL

VIR-SP

CALCULATION

Description

The display VIR-SP together with the bi-directional magnetic sensor SM are a complete system that

can be applied on all hose reel irrigators, for measuring of irrigation speed, lacking time of irrigation's

end and length of unwound tube. By programming the instrument with the correct diameter value of

tube and hose reel, coil number, layer number, and so on. The variation of the coil diameter is

compensate during winding/unwinding of the tube and the value showed on the display corresponds to

the real value of the irrigation speed, lacking time and length of unwound tube.

The programming and consultation of all functions is very easy and immediate by means of three

frontal keys and the LCD display (range 0-999) with 12 mm high digits.

The instrument is battery supplied and doesn't needs an outside supply.

The display has a shockproof and self-extinguishing plastic case with protection degree IP65, frontal

dimensions are 72x72 mm, supplied with two clamps for the panel assembling.

The magnetic transducer is seated in a cylindrical case threaded M12x1 with a 2 m long cable and it

works with a magnet, which has be mounted on the rotating part of the irrigator.

Frontal view

Back view

Presscable PG7

RESET

TIME

METER

Power supply

The instrument is fed with 3 batteries 1,5V R6A AA (common type for radio), they have a last about

3000 hours, more than a year with 8 hours of irrigation at day. We advise to change the batteries every

year at the beginning of season.

To substitute batteries take away the back panel and screw off the four close-screws, put out the

battery-holder and change batteries taking a look to the polarity on the same battery-holder.

Data: 20/02/06

File : VIR_SP_ing.doc

Rev:1.2

Pagina 1 di 4