FIAMA P50 Посібник користувача та технічне обслуговування - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача та технічне обслуговування для Перетворювач FIAMA P50. FIAMA P50 6 сторінок.

The band consists of a magnetized plastic ferrite strip with alternate magnetic poles of 5 mm pitch, carried by

a ferromagnetic steel strip. Mechanical protection of the plastic ferrite strip is supplied by a non magnetic

steel strip with tickness 0,2mm.

The magnetic band is assembled by sticking it with a biadhesive tape. The surface has to be smooth, clean

and dry: is advisable to clean it with a degreasing product (isopropyl alcohol, ethyl alcohol, solvents, etc). The

magnetic band has to be sticked holding the plastic ferrite side in the direction of the sensor, which means

the steel side leaned on the stand surface. Fixed the magnetic band, to keep off damages due to abrasions

or grazes of the plasic ferrite strip, is advisable the appliance (always biadhesive) of the non magnetic

protection streep.

The optimal ambient temperature for stick the biadhesive tape is over 10°C. The maximum adherence of the

tape works out after 48 hours (about) of the application and is kept between –10 and 80°C.

sensor side

1,7

Magnetic ring

Data: 13/01/16

Magnetic strip

file: MTP_ing.doc

non magnetic steel strip

(mechanical protection)

plastic ferrite strip

steel strip

(plastic ferrite support)

MAX 2mm

MTP_

pag 4/5