Digimerge DPD24D Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Камера спостереження Digimerge DPD24D. Digimerge DPD24D 15 сторінок. Ultra resolution day & night dome camera
Також для Digimerge DPD24D: Інструкція з експлуатації (15 сторінок), Інструкція з експлуатації (14 сторінок)
Друкувати сторінку
CAMERA ADJUSTMENT
Menu Setup
RCA Service Connector
Use supplied RCA - BNC cable
If you require BNC output.
MENU TREE SUMMARY
LENS
• DC or MANUAL (Model DPD23D)
EXPOSURE • SHUTTER • AGC • SENS-UP • BLC • D-WDR • RETURN
WHITE BAL • AWB • ATW • AWC SET • OUTDOOR • INDOOR • MANUAL
DAY&NIGHT • AUTO • COLOR • B/W (not on Model DPV24TLX)
3DNR
• OFF • ON
SPECIAL
• CAM TITLE • D-EFFECT • MOTION • PRIVACY
• SYNC • LANGUAGE
ADJUST
• SHARPNESS • MONITOR • OSD COLOR
RESET
• FACTORY • RETURN
1. Press down on the function joystick to access the setup menu.
• Main setup menu is displayed on the monitor screen.
1.
LENS
1.
LENS
2.
EXPOSURE
3.
WHITE BAL
4.
DAY&NIGHT
5.
3DNR
6.
SPECIAL
7.
ADJUST
8.
RESET
9.
EXIT
2. Select a function by moving the joystick up and down and move left or right to change
setting value and press joystick to confirm selection.
3. If a menu option features a ' ', a sub menu is available which can be accessed by pressing
down on the joystick
4. Once finished updating settings, highlight 'EXIT' and press down on the joystick
to exit setup menu
OSD function joystick. Pressing down
on joystick acts as ENTER function.
DC
DC
AWB
AUTO
ON
-10-
CAMERA ADJUSTMENT
LENS
Using this function, you can control screen brightness.
1. Highlight 'LENS' in the main setup menu
2. Press the joystick to access the DC lens setup menu.
3. After completing setting update, highlight 'RETURN' to save setting and return to previous menu
SETUP
1. LENS
2. EXPOSURE
• NOTE
The brightness level can be adjusted within
the range of 0 - 100. Default setting - 50
With Model DPD23D DC Lens setting is MANUAL
EXPOSURE
SETUP
1. LENS
2. EXPOSURE
3. WHITE BAL
The EXPOSURE menu is used to set the automatic
light control method for the camera.
1. Highlight 'EXPOSURE' in the main setup menu
2. Press the joystick to access the exposure setup menu.
SHUTTER : Select the shutter mode. (1/60, FLK - 1/100,000 sec, x2 - 256)
Default setting is 1/60
AGC:
Auto gain control (LOW / MIDDLE / HIGH)
Default setting is MIDDLE
-11-
DC
LENS
BRIGHTNESS -----|----��
RETURN
RET
DC
AWB
EXPOSURE
SHUTTER
�/��
AGC
MIDDLE
SENSE-UP
AUTO
BLC
OFF
D-WDR
OFF
RETURN
RET