Cisco AP776A - Nexus Converged Network Switch 5020 Примітка до випуску - Сторінка 17

Переглянути онлайн або завантажити pdf Примітка до випуску для Перемикач Cisco AP776A - Nexus Converged Network Switch 5020. Cisco AP776A - Nexus Converged Network Switch 5020 22 сторінки. Cisco nexus 5000 series release notes release 4.1(3)n1(1) (ol-16601-01 h0, july 2009)
Також для Cisco AP776A - Nexus Converged Network Switch 5020: Примітка до випуску (48 сторінок), Примітка до випуску (44 сторінок), Примітка до випуску (26 сторінок), Короткий довідник (14 сторінок), Примітка до випуску (3 сторінок), Примітка до випуску (26 сторінок)

Друкувати сторінку
Cisco AP776A - Nexus Converged Network Switch 5020 Примітка до випуску
Note: Fabric/Device Manager cannot be used to configure this feature.
1. Log into the switch using either the management console or telnet.
2. Enter your network-admin privileged account by entering your login name and password
switch login: admin
Password: <admin password>
3. Enter the following to enter configuration mode:
switch# config terminal
4. Select the desired switch port:
switch(config)# interface fc 1/<1-20>
5. Select the desired switch port speed:
switch(config-if)# switchport speed ?
1000
1000 Mbps speed
2000
2000 Mbps speed
4000
4000 Mbps speed
Auto
Autosense speed
switch(config-if)# switchport speed <desired speed>
switch(config-if)# exit
switch(config)# exit
6. Copy the running configuration into the startup configuration by entering the following:
switch# copy running-config startup-config
Note: The running configuration overwrites the startup configuration.
In the following example, port 9 is being set to 2-Gbps:
switch login: admin
password: <admin password>
switch# config terminal
switch(config)# interface fc 1/9
switch(config-if)# switchport speed 2000
switch(config-if)# exit
switch(config)# exit
switch# copy running-config startup-config
C-SERIES MDS 9134 FABRIC SWITCH
The MDS 9134 switch has a base 34-port chassis to accommodate up to 32 full rate 4-Gbps and 2
10-Gbps fibre channel ports. Four configurations are available:
24 4-Gbps active ports with optional 8-port 4-Gbps and 2-port 10-Gbps software
expansion licenses
32 4-Gbps active ports with an optional 2-port 10-Gbps software expansion license
24 4-Gbps and 2 10-Gbps active ports; a 48-port stackable solution is available with the
purchase of two of these products.
32 4-Gbps and 2 10-Gbps active ports; a 64-port stable solution is available with the
purchase of two of these products.
17
MDS Multilayer Director & Multilayer Fabric Switches Release Notes