Crestron UC-MX50-Z-UPGRD Посібник із швидкого старту - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Конференц-система Crestron UC-MX50-Z-UPGRD. Crestron UC-MX50-Z-UPGRD 9 сторінок. Flex advanced medium room upgrade solution with zoom rooms software
Також для Crestron UC-MX50-Z-UPGRD: Посібник із швидкого старту (8 сторінок)

Друкувати сторінку

UC-MX50-Z-UPGRD

Crestron Flex Advanced Medium Room Upgrade Solution with Zoom Rooms® Software

Bundle Cables

Bundle the cables together and use a provided tie wrap to secure the

bundle to one of the positions on the cable retention plate at the rear of

the device. Avoid bundling power and data cables together.

Configure

Apply Power

Press the power button on the bottom of the UC Engine and apply

power to all of the other devices in the system.

Complete the Conference Device Configuration

To configure the conference device to operate in Zoom Rooms Video

mode:

1. On a computer, enter the IP address displayed on the conference

device into a web browser.

NOTES:

The device and computer must be on the same network switch

and VLAN.

A login with administrative rights for the device is required.

2. Enter the following information in the appropriate fields:

UC-Engine Address: Enter the IP address or hostname of the UC

Engine.

NOTE: The hostname is printed on a label affixed to the UC

Engine.

UC-Engine Port: By default, port number 49500 is used. If a

different port number has been configured on the UC Engine,

enter that port number instead.

UC-Engine Admin Username: Enter the username for the UC

Engine. The default username is "admin".

UC-Engine Admin Password: Enter the login password for the UC

Engine. The default password is "crestron".

3. Select Save Changes.

Quick Start