Digital Acoustics IP7-SS20 Довідковий посібник - Сторінка 14
Переглянути онлайн або завантажити pdf Довідковий посібник для Підсилювач Digital Acoustics IP7-SS20. Digital Acoustics IP7-SS20 20 сторінок. Ip paging amplifier
Також для Digital Acoustics IP7-SS20: Посібник для початківців (4 сторінок)
Друкувати сторінку Attach the detachable surface mount plate to the back of the
unit using the provided screws. The two mounting holes of the
surface mount plate should be above the
J1, J2, and J3 connectors
Attach two (2) #8 pan head screws 2
inches (52 mm) apart and screw in to
within ¼"
Place the mounting holes of the IP7-SS20
over the #8 screws
Attach one (1) #8 screw to the remaining hole at the bottom of
the mounting plate
Setting Volume Levels
The IP7-SS20 supports seven volume levels for an attached speaker.
Press the "+" or "-" Button one time to increase or decrease the
speaker volume
If no audio is playing, a high frequency beep is heard when the
volume "+" is pressed and a low frequency beep is heard when
the volume "-" is pressed
Pressing the "-" or "+" button seven times sets the unit at its
lowest or highest setting.
Refer to the software manuals for setting the volume via
software.
Software Configuration
IP Address
Refer to the software manuals for instructions on setting the IP
address information for the IP7-SS20
Options
Refer to the software manuals for instructions on setting the "Remote
Listen Disable" option in the IP7-SS20:
11