Siemens SIWAREX WL230 BB-S SA Посібник - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник для Промислове обладнання Siemens SIWAREX WL230 BB-S SA. Siemens SIWAREX WL230 BB-S SA 36 сторінок. Base plate and elastomer bearing bb-s sa
Також для Siemens SIWAREX WL230 BB-S SA: Інструкція з експлуатації Посібник з експлуатації (48 сторінок), Посібник з експлуатації обладнання (50 сторінок), Інструкція з експлуатації Посібник з експлуатації (44 сторінок)

Application planning

4.1

Load cells are sensitive sensors. To protect the load cells from becoming damaged during

installation and transport, install the load cells only at the last minute. Replace the load cells

during installation and transport with placeholders, so-called dummies or phantoms.

4.2

The following figure shows a proposed solution for lifting protection. The X designates the

possible lifting path of the load bearing implement. The bore ØD must be larger than the

diameter of the bolt Ød. The movement of the load bearing implement must not be hindered.

Figure 4-1

4.3

Mounting surfaces

The following requirements apply to the installation areas:

● The positional and angular deviations of the mounting areas to each other correspond to the

general tolerances for welded constructions in EN ISO 13920.

● Ensure that the foundations are absolutely firm and free of depressions. Mount the

installation elements in concrete foundations on evenly cast steel plates.

● The mounting surfaces must be vertical to the measuring direction and preferably in one

plane.

● A plane of ≤ 0.2 mm is required for the mounting surfaces.

SB-S CA

Manual, 06/2019, A5E47600142-AA

Proposed solution for lifting protection