Samsung 5 Series Посібник користувача - Сторінка 27

Друкувати сторінку

how to set up automatically

To set up the wireless connection automatically, follow these

steps:

1. Follow Steps 1 through 6 in the "How to set up using

PBC (WPS)". (P. 26)

2. Press the ▼ button to select Internet Protocol setup,

and then press the EnTERE button. Press the ▲ or

▼ button to select Auto, and then press the EnTERE

button.

3. Press the ▲ button to go to select a network, and

then press the EnTERE button. The network function

searches for available wireless networks. When done, it

displays a list of the available networks.

4. In the list of networks, press the ▲ or ▼ button to select

a network, and then press the EnTERE button.

✎

If the AP is set to Hidden (Invisible), you have

to select Add network and enter the correct

network name (ssID) and security Key to

establish the connection.

5. If the Security/PIN pop-up appears, go to Step 6. If the

Network Connecting Screen appears, go to Step 10.

6. Press the ▲ or ▼ button to select security or PIn. For

most home networks, you would select Security (for

security Key). The security Screen appears.

Select a network

Security Key

n Move E Enter R Return

7. On the security screen, enter your network's Pass

Phrase.

✎

You should be able to find the Pass Phrase on

one of the set up screens you used to set up your

router or modem.

8. To enter the Pass Phrase, follow these general

directions:

–

Press the number buttons on your remote to enter

numbers.

–

Use the direction buttons on your remote to move

from button to button on the security Key screen.

–

Press the Red button to change case or display

symbols/characters.

–

To a enter letter or symbol, move to the letter or

symbol, and then press the EnTERE button.

–

To delete the last letter or number you entered,

press the Green button on your remote.

0 entered

Number

0~9

Lower case

Delete

Space

9. When done, press the Blue button on your remote. The

Network Connecting screen appears.

10. Wait until the connection confirmation message is

displayed, and then press the EnTERE button. The

network setup screen re-appears.

11. To test the connection, press the

select network Test, and then press the EnTERE

button.

network setup (Ad-hoc)

You can connect to a mobile device without an access point

through the "Samsung Wireless LAN Adapter" by using a

peer to peer network.

how to connect to new Ad-hoc

1. Follow Steps 1 through 6 in the "How to set up using

PBC(WPS)". (P. 26)

2. Choose select a network. A list of devices/networks

appears.

3. While in the device list, press the Blue button on the

remote.

✎

The message

"Ad-hoc is a direct WI-Fi

connection with cellphone or PC. The existing

network system may have limited functionality.

Do you want to change the network

connection?" is displayed.

4. Input the generated network name (ssID) and

security Key into the device you want to connect.

how to connect an existing Ad-hoc device

1. Follow Steps 1 through 6 in the "How to set up using

PBC(WPS)". (P. 26)

2. Choose select a network. Then, the device list will be

displayed.

3. Select the device you want in the Device list.

4. If security key was applied, input the security key.

✎

If network does not operate normally, check

the network name (ssID) and security Key

again. An incorrect security Key may cause a

malfunction.

RETURn

button to

English