Samsung U28R550 Посібник користувача - Сторінка 33

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Samsung U28R550. Samsung U28R550 46 сторінок.
Також для Samsung U28R550: Посібник користувача (45 сторінок)

Samsung U28R550 Посібник користувача
3
Base on the test result, select
Yes
/
No
Do you still see the same problem on the test screen?
If you need to see the photo again, click Show Again.
Yes
No
You will see the following screen when you select Yes.
Self Diagnosis Complete
Contact the Samsung Call Center for assistance.
Please have the following information ready:
‐ Model Code: **************
‐ Software Version: *-*********-****.*
‐ S/N: **************
OK
You will see the following screen when you select No.
Self Diagnosis Complete
If the test screen is okay during Self Diagnosis, your monitor may not have a problem. If the
problem persists, follow the steps below:
‐ Turn off your monitor and any other connected device, such as a PC.Turn on your monitor first
and then the other connected device.
‐ Update the operating system and graphics card driver to the latest version and restart your PC.
‐ Connect the other device, such as a PC, to a different input port on your monitor.
‐ Reset your monitor by pressing the jog button on the monitor and selecting System > Reset All.
‐ Replace the cable with the one enclosed with your monitor.
OK
/
Show
Again.
Show Again

DisplayPort Ver.

Select the DisplayPort version to use.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
― If the product (when set to DisplayPort) is displaying the message
settings of the source device.
press the JOG button to display the Function Key Guide screen and then
select
System
DisplayPort Ver.

HDMI Mode

Select the HDMI mode to use.
― The supportable device and resolution may differ depending on its version.
― When the version is changed, the screen may blink.
― If you set the
HDMI Mode
to 1.4, some high resolutions may not be supported because of bandwidth
limitation of the HDMI 1.4 protocol.
― When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the
device.
― This menu is not available when
PIP/PBP Mode
Check the cable connection and the
1.1
or 1.2↑.
is set to
On
and the
Screen Size
is set to
(PBP Mode).
33