Siemens EC745RT90A Інструкція користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція користувача для Варильна поверхня Siemens EC745RT90A. Siemens EC745RT90A 25 сторінок.
Друкувати сторінку
- Remove all the burner covers, pan supports and
control knobs.
- Loosen the screws on the burners.
Use the disassembly lever 483196 availablle from our
Technical Assistance Service. To release the front clips,
apply the lever to the area shown in figure 10.
Fig. 10
To assemble the grease splash tray again, proceed in
the reverse order to removal.
It is important that all the seals are refitted to form a seal.
These devices are essential for the correct operation of
the appliance as they prevent liquids and dirt from
entering the appliance.
Refit the control knobs.
Never remove the tap spindle. In the event of a
malfunction, change the whole tap.Fig. 11.
Fig. 11
Warning! After finishing, the sticker indicating the new type
of gas must be placed close to the specifications plate.
14