Cisco 7962G - Unified IP Phone VoIP Посібник користувача - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник користувача для IP-телефон Cisco 7962G - Unified IP Phone VoIP. Cisco 7962G - Unified IP Phone VoIP 23 сторінки. Unified communications manager 9.0 (sccp and sip)
Також для Cisco 7962G - Unified IP Phone VoIP: Технічний паспорт (5 сторінок), Посібник користувача (6 сторінок), Посібник користувача (4 сторінок), Технічні характеристики (5 сторінок), Посібник з адміністрування (12 сторінок), Посібник користувача (13 сторінок), Посібник користувача (12 сторінок), Короткий довідник (2 сторінок), Посібник користувача (6 сторінок), Посібник з адміністрування (16 сторінок), Усунення несправностей та обслуговування (27 сторінок)

If a phone that is using the shared line has Privacy enabled, call information and Barge/cBarge soft keys do not appear

–

on the other phones that share the line.

Hold a Shared-Line Call (SIP)

User can put calls on a shared line on hold like calls on a non shared line.

To place a call on hold while on a shared-line call:

• Highlight the call that you want to put on hold.

• Press the Hold soft key.

Resume a Shared Line Call (SIP)

User can resume a non-private call placed on hold on a shared line call.

To resume a shared line call:

1. Highlight the call that you want to resume.

2. Press Resume to resume the call.

Tip

When a shared-line call is placed on hold, a flashing green shared line button notifies all the other phones with the

–

shared-line directory number that the call can be resumed.

Enable Privacy on Shared-Line (SIP)

Users can prevent others from viewing, barging, or resuming a Shared-Line Call by enabling the privacy feature on the phone.

To prevent other from viewing or barging calls:

1. Press the privacy line button

2. The private icon

3. Press the privacy button again to disable privacy.

Tips

The privacy button is not displayed on the shared-line phone by default. Your system administrator must enable privacy

–

button on a per phone basis.

Privacy is enabled by default for shared-lines. Your system administrator can change the default privacy setting globally

–

or on a per phone basis.

Calls placed on hold with privacy enabled have privacy disabled by default. Your system administrator can change the

–

default privacy on hold setting globally.

Place a Call from Your Local Directory

To access the local phone directory established by your system administrator:

1. Press the Directories button.

2. Press the Navigation Up or Down button or press 4 to select the Local Directory.

3. Press the Navigation Up or Down button to select the Last, First, or Number field search option.

4. Using the keypad, enter the last name or first name for the entry.

When entering letters, select the appropriate number key of the letter you want, and press that key a number of times that

equals the position of the target letter. For example, to enter a B, press the 2 key two times, and to enter a C, press the 2

key three times. Use the backspace (<<) soft key to make corrections when entering data.

5. Press the Search soft key to find your selection.

6. If your search results in multiple listings, use the Navigation Up or Down button to select the correct number.

next to an amber line button

verifies that privacy is on.