Cisco 8821 Налаштування - Сторінка 3

Переглянути онлайн або завантажити pdf Налаштування для IP-телефон Cisco 8821. Cisco 8821 16 сторінок. Wireless ip phone
Також для Cisco 8821: Посібник з використання аксесуарів (30 сторінок), Усунення несправностей (5 сторінок), Посібник кінцевого користувача (6 сторінок), Посібник із швидкого старту (2 сторінок)

Phone Setup

The battery has metal contacts that must connect to the contacts in the battery compartment. The battery also

has an arrow at the bottom and the Cisco logo at the top.

When the battery is correctly inserted, the logo and arrow are visible. The arrow points towards the connector

on the base of the phone and the logo is close to the locking catch.

The battery compartment has small tabs in the bottom corners. The battery must slide under these tabs. The

following graphic shows the battery compartment without and with the battery correctly installed.

a) Hold the battery so that the lower edge is close to the bottom of the compartment. Make sure that the

metal contacts on the phone and battery face each other. On the battery, the Cisco logo must be near the

locking catch and the arrow must point to the base of the phone.

Install the Cisco Wireless IP Phone 8821 Battery

Phone Setup