Ricoh SP 200 Посібник з інсталяції програмного забезпечення - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник з інсталяції програмного забезпечення для Принтер "Все в одному Ricoh SP 200. Ricoh SP 200 21 сторінка. Software installation guide
Також для Ricoh SP 200: Посібник зі швидкого встановлення (2 сторінок), Посібник зі швидкого встановлення (2 сторінок), Посібник зі швидкого встановлення (2 сторінок)

4. Troubleshooting

The USB cable may not be connected properly.

■

Check that the USB cable is connected properly and is undamaged.

The CD-ROM may not be inserted properly.

■

Check that the CD-ROM is inserted properly. Check also that it is not damaged and the CD-

ROM drive is working properly.

Other applications are not closed.

■

When installing software, quit all other applications. Installation may be disrupted if other ap-

plications are open. Also, quit any anti-virus applications that are running.

The machine is turned on before installation.

■

Turn the machine off and then on, and then try "USB Quick Install" again.

The Ethernet cable may not be connected properly.

■

Check that the Ethernet cable is connected properly and is undamaged.

The CD-ROM may not be inserted properly.

■

Check that the CD-ROM is inserted properly. Check also that it is not damaged and the CD-

ROM drive is working properly.

The machine's IP address has not been configured, or the machine and computer are

■

not on the same network.

If the machine does not appear on the network, its IP address has not been configured or it is

on a different network from the computer. In the event of such a problem, check the machine's

IP address and network configuration.

The machine is unable to automatically obtain the IP address.

■

Check whether the DHCP server is working.

Network settings have not been reset.

■

To change the IP address via Smart Organizing Monitor, it is necessary to reset network set-

tings. For details, see "Resetting Network Settings".