Ricoh Aficio 1050 Інструкція з експлуатації Посібник з експлуатації - Сторінка 25
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Принтер Ricoh Aficio 1050. Ricoh Aficio 1050 36 сторінок. Sap printing
Також для Ricoh Aficio 1050: Посібник (12 сторінок)
Друкувати сторінку
Bell105sysGB-FIN_FM.book Page 11 Wednesday, April 19, 2000 11:13 AM
Menu
System Reset
Energy Saver Timer
Panel Off Timer
Auto Off Timer
Description
If no operation is performed for a selected time, the ma-
chine will automatically return to initially selected display.
This function is called "System Reset". You can set the time
between 10 and 999 seconds.
Note
Default: 60 seconds
The machine enters the Energy Saver mode automatically a
certain time after your job is finished. You can set the time
between 1 and 240 minutes.
Note
Default: 15 minutes (1 minute steps)
The machine enters to the Panel Off mode automatically af-
ter your job is finished, after the selected time. You can set
the time between 10 and 999 seconds.
Note
Default: 60 seconds (1 second steps)
Reference
See "Auto Off Timer"⇒ P.10 "General Features".
The machine turns itself off automatically to conserve ener-
gy a certain time after your job is finished. This function is
called "Auto Off". You can set the time between 1 and 240
minutes.
Important
If you use these three functions (Energy Saver Timer,
Panel Off Timer and Auto Off Timer), when your copy
job ends, the machine will enter the Panel Off mode ac-
cording to the Panel Off Timer after the specified time.
Next, it will enter the Energy Saver mode according to
the Energy Saver Timer after the specified time. Then it
will turn itself off automatically according to the Auto
Off Timer after the specified time.
Note
Default:
• Type1: 90 minutes (1 minute steps)
Type2: 120 minutes (1 minute steps)
Auto Off might not be effective when an error message
is displayed.
To return to the Ready condition from Auto Off, the ma-
chine requires the same warm-up time as the time for be-
coming ready after its power is turned on.
Settings You can Change with the User Tools
1
11