Cisco 2500 Series Посібник з розгортання - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з розгортання для Мережевий маршрутизатор Cisco 2500 Series. Cisco 2500 Series 23 сторінки. Wireless controller
Також для Cisco 2500 Series: Посібник з встановлення (12 сторінок), Посібник з конфігурації (19 сторінок), Посібник з конфігурації (50 сторінок), Посібник для початківців (47 сторінок)

Requirements

There are no specific requirements for this document.

The information in this document is based on the Cisco 2500 Series Wireless Controller.

Hardware Specifications

•

Data Ports 4 x 1 Gigabit Ethernet Ports

•

Console Port 1 x RJ45

•

External 48V Power Supply

Software Specifications

•

Feature parity with Cisco 2100 Series Wireless Controllers

The information in this document was created from the devices in a specific lab environment. All of the

devices used in this document started with a cleared (default) configuration. If your network is live, make sure

that you understand the potential impact of any command.

•

Support for Control and Provisioning of Wireless Access Points (CAPWAP) protocol

•

Encryption on CAPWAP Data Tunnel (DTLS) (optional)

•

License−based AP count. AP Counts − 50 (in steps of 5, 25, 50)

•

Supported Client Count − 500 (In all STATE)

•

Supported Tag Count − 500

•

Triple Play Ready − Supports Data, Voice and Video

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Hardware Architecture of Cisco 2500 Series Wireless

Controller

These sections provide a greater insight into the architecture of the new Cisco 2500 Series Wireless

Controller.

The Cisco 2500 Series Wireless Controller physically has the same form factor as the Cisco 2106 controller.

The CPU on a Cisco 2500 Series Wireless Controller is a multi−core CPU and can handle both data plane and

wireless data traffic. The CPU can handle control plane application, which handles all the management traffic

needed to control a wireless network.