Cisco 2811 - Voice Security Bundle Router Операції - Сторінка 17
Переглянути онлайн або завантажити pdf Операції для Мережевий маршрутизатор Cisco 2811 - Voice Security Bundle Router. Cisco 2811 - Voice Security Bundle Router 31 сторінка. Integrated services routers
Також для Cisco 2811 - Voice Security Bundle Router: Посібник із швидкого старту (45 сторінок)
Друкувати сторінку
Figure 11 – 2811 Tamper Evident Label Placement on the Opacity Shield
For Cisco 2821:
1. Clean the cover of any grease, dirt, or oil before applying the tamper evidence
labels. Alcohol-based cleaning pads are recommended for this purpose. The
temperature of the router should be above 10 C.
2. The tamper evidence label should be placed so that one half of the label covers
the front panel and the other half covers the enclosure.
3. The tamper evidence label should be placed over the CF card in the slot so that
any attempt to remove the card will show sign of tampering.
4. The tamper evidence label should be placed so that the one half of the label
covers the enclosure and the other half covers the port adapter slot.
5. The tamper evidence label should be placed so that the one half of the label
covers the enclosure and the other half covers the rear panel.
6. Place tamper evident labels on the opacity shield as shown in Figure 14.
7. The labels completely cure within five minutes.
Figures 12, 13 and 14 show the additional tamper evidence label placements for the 2821.
© Copyright 2007 Cisco Systems, Inc.
This document may be freely reproduced and distributed whole and intact including this Copyright Notice.
17