Cisco 3745 Посібник із швидкого старту - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережевий маршрутизатор Cisco 3745. Cisco 3745 33 сторінки. Non-proprietary security policy
Також для Cisco 3745: Огляд рішення (16 сторінок), Інструкції з оновлення (30 сторінок), Посібник користувача (48 сторінок), Посібник з монтажу (12 сторінок)

Installing the Chassis

You can set the chassis on a desktop or install it in a rack. See the applicable instructions in the following sections:

• Rack-Mounting the Chassis, page 10

• Installing on a Desktop, page 11

Cisco 3745 routers are not designed for wall-mounting.

Note

The standard accessory kit contains brackets for mounting the chassis in a 19-inch rack. You can order an optional accessory

kit with brackets and instructions for mounting the chassis in a 23- or 24-inch rack.

You can mount the chassis in the following ways:

• Front panel forward

• Back panel forward

• Center mount with either front or back panel forward

Attaching Brackets

Attach the mounting brackets to the chassis as shown in Figure 1, Figure 2, or Figure 3, using the screws provided in the bracket

kit. Attach the second bracket to the opposite side of the chassis. Use a number 2 Phillips screwdriver to install the bracket

screws.

Note

Some 19-inch racks have power strips on the back vertical rails that block cable access to power supplies. Be sure to

choose an orientation that provides unrestricted access to the back panel.

Figure 1

Bracket Installation—Front Panel Forward

C is c o 3 7

0 0

S E R IE S