Actulux Gemalto 111950 Короткий посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Короткий посібник для Модем Actulux Gemalto 111950. Actulux Gemalto 111950 4 сторінки. For control panels

Testing the system:

(Make sure that this test will not trigger an alarm to the rest of the system)

The system sends a SMS with the following text in these cases:

Power up – "Smoke Vent Monitor powered up"

Disconnect 230VAC – "MESSAGE FROM SMOKE VENT –

SYSTEM NEEDS ATTENTION!"

Reconnect 230VAC – "MESSAGE FROM SMOKE VENT –

SYSTEM OK"

Fire switch pressed – "MESSAGE FROM SMOKE VENT –

SYSTEM NEEDS ATTENTION"

Fire alarm reset – "MESSAGE FROM SMOKE VENT – OK"

Be aware that the system will only send one SMS in the event of an alarm

or fail. If fail occurs before the alarm, then the user will only receive one

SMS and in this case it will be the "fail message" SMS.

Control of mobile network connection:

Since the modem uses external mobile network operators, we recommend

checking the mobile connection regularly, by forcing the system into failure

mode.

Page 3/5

Guide for changing SIM card & phone number on

existing system:

Disconnect power

Change the SIM card. See Figure 1.

Connect USB cable to the modem. See Figure 2

Download software from www.Actulux.dk/Techn. Info/Software

Power up system

Wait for 10 seconds

Run ConfigureModem.exe – Select COM port and enter phone

number - > Press then Phone Setup. See figure 6

Disconnect USB cable

Disconnect modem power

10.

Reconnect modem power

Remember to verify that the system is up and running after using the

Actulux GSM Modem PC software. To do this, follow the steps in the

"Testing the system" section of this document, page 3.

Figure 6

Page 4/5