Cabane Classic Adirondack Інструкція з монтажу
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Внутрішнє оздоблення приміщень Cabane Classic Adirondack. Cabane Classic Adirondack 2 сторінки.
Друкувати сторінкуAssembly instructions Classic Cabane Adirondack chair
Parts List:
• Seat assembled
• Back assembled
• Front legs
• Arms
Place the assembled Seat on its side on a flat clean surface.
Locate the Front Leg that you will be installing (Right Picture).
Insert a long connector bolt down through the outermost pre-
drilled hole in front leg and align this with the pre-drilled hole
in seat assembly. Install flat washer, lock washer, and nut.
Finger tighten nut onto bolt in Front Leg, then partially install
the other
(2) long connector bolts, washers and nuts, next to the one you
have just installed. Flip the chair over and repeat process for the
other side. Do not tighten at this time.
Hardware:
Step One: Leg Assembly
1
• (6) long Connector Bolts
• (4) short Connector Bolts
• (10) Flat Washers
• (10) Lock Washers
• (10) Nuts
• (4) Robertson head Screws
• Screw bit