Cisco 700 series Посібник з адміністрування - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник з адміністрування для Бездротова точка доступу Cisco 700 series. Cisco 700 series 36 сторінок. Using profiles
Також для Cisco 700 series: Посібник із швидкого старту (8 сторінок), Огляд (19 сторінок), Посібник для початківців (27 сторінок), Посібник користувача (9 сторінок)

Configure User Profiles for Headset Users

If you haven't yet configured User Profiles for your users, use this procedure to set up profiles. Your headset

templates will be assigned to users via their User Profile. If you've already configured User Profiles, you can

skip this task.

Note

Configure multiple User Profiles for different groups of users as per your deployment needs. By default, all

User Profiles get assigned to the System default headset template. You can assign them to customized templates

when you configure your headset template.

Procedure

Step 1

From Cisco Unified CM Administration, choose User Management > User/Phone Add > User Profile.

Step 2

Click Add New.

Step 3

Enter a Name and Description for the user profile.

Step 4

Assign a Universal Device Template to apply to users' Desk Phones, Mobile and Desktop Devices, and

Remote Destination/Device Profiles.

Step 5

Assign a Universal Line Template to apply to the phone lines for users in this user profile.

Step 6

If you want the users in this user profile to be able to use the self-provisioning feature to provision their own

phones, do the following:

a) Check the Allow End User to Provision their own phones check box.

b) In the Limit Provisioning once End User has this many phones field, enter a maximum number of

phones the user is allowed to provision. The maximum is 20.

Step 7

Click Save.

Associate your users to the User Profiles that you've created. The User Profile must be associated with the

end user, and the MAC of the device must be added under the controlled devices to apply the headset template

configuration changes.

Note

If you've already assigned all users to the appropriate User Profiles, you can skip this task.

Procedure

Step 1

To add a new end user to the Unified Communications Manager database manually, perform the following:

a) In Cisco Unified CM Administration, choose User Management > End User.

Cisco Headset 700 Series Administration Guide

Cisco Headset 700 Series Administration on Cisco Unified Communications Manager